Slurry Seal Truck
6 (six) cubic meters of capacity, constructed in steel folded of 4.76mm
(3/16") welded electrically and reinforced externally with normal profiles,
the hopper of barren is provided with a hopper of filler electrically of 260
kilos of total capacity constructed in welded steel.
The equipment has a tank of emulsion of 2,200 liters of capacity
constructed in plate folded of 3.17mm (1/8") of thickness connected to the
pump by means of pipes of 76mm (3") of diameter, a water tank of 2,200
liters of capacity constructed in plate folded of 3.17mm (1/8") of thickness
connected to the water pump by means of pipes of 38.1mm (1 ½") of diameter.
The feeding and metering of aggregates are made by means of a
transporting rubber tape and fabric of 600mm of wide mounted on rollers,
adjustable by means of driven rotating floodgate manually from the outside,
the feeder of filler is of continuous type by nourishing spiral with fine
hydraulic regulation, the emulsion is added by means of pump of 2" heated by
water of the motor of combustion, adjustable by means of valves with return
to tank, for the irrigation and humectacion of aggregates it is provided by
a centrifugal pump of (1 ½) and one bar of irrigation peaky with
pulverization of flat fan.
The mixer is of continuous type to trowels with two longitudinal axes
mounted on axial armored bearings, the exit regulation is obtained by means
of a floodgate to hydraulics that unloads the grout in the distributor.
Allows to distribute until a wide one of 4,000 mm and is equipped with two
(2) distributing spirals with their corresponding hydraulic motors, the
elevation for the transfer and the lateral displacement for the correction of
alignment of distribution is obtained by means of driven hydraulic cylinders
from the command platform.
The motor equipment is constituted by diesel engine, cooled by water. The
board of control of the motor has pressure gauges of oil, temperature, load of
alternator, counts and hours revolutions, and key of starting.
The power transmission is made by means of a located hydrostatic
transmission in the later part of the motor that drives the transporting tape,
pump of emulsion, water pump, the nourishing spiral of filler and distributing
spirals of the distributor.
The equipment is given with two hands of chromate anti oxidize and two
synthetic enamel hands.
The chassis or truck adapted for the
assembly of the equipment would be provided by the client.
will be happy to quote special machines or proyect plant
on receipt of details of composition of the product, etc.
More Information Send Mail to:
Copyright © 2005-10 | All Rigths
Reserved. | Home | Buenos Aires
TELFAX: 005411-4754-9374 / 5931-8045 / 5931-8727